The DSC is controlled either manually or hydraulically. It is the most compact spreader in the range, but features all elements of the Kubota spreader range. The basic hopper capacity is 700 litres, but can be increased up to 900 or 1,400 litres with different hopper extensions. The standard working width is 9-18m, but can be increased up to 20/21m with an optional kit of vanes.
The DSM spreader is the master of the medium segment.
The DSM is the perfect spreader for the medium segment of farms! Each spreading disc has 8 vanes and their length determines the working width of the machine. These 8 vanes contribute to the highly accurate spread pattern across the complete working width reaching from 10 up to 28 metres. With the easy to assemble aluminium extension rims the basic hopper capacity of 1,100 litres can be increased up to 1,550 or 2,000 litres.
Make spreading easy with the DSM-W!
The DSM-W is the ideal weighing spreader for the smaller grower! This ISOBUS 11783 compatible weighing spreader is equipped with an unique reference sensor. The FlowPilot dashboard on each spreading disc ensures simple and quick setting or adjustment. The basic hopper capacity is 1,100 litres, but this volume can be increased with maximal 2 easy to assemble aluminium hopper extensions up to 2,000 litre hopper capacity.
Working widths from 10 up to 24m are possible. An optional kit of vanes is available for 27/28m spreading. The DSM-W can be operated with the Kubota IsoMatch Tellus or Tellus GO. Highest accuracy in all conditions: even spreading quality guaranteed. Save costs and increase quality!
The DSM-W GEOSPREAD is the ideal spreader for arable farmers and professional dairy farmers. The GEOSPREAD system does section control of only 2 metres. With a maximum of 14 sections and the possibility to switch over the middle, unnecessary overlap is set to an absolute minimum.
The 4 load cells and reference sensor on the DSM-W GEOSPREAD are important features as with section control accurate weighing is essential. The total benefit of GEOSPREAD combined with speed related spreading and GEOPOINT headland management can be up to 15%. This can be achieved by saving fertiliser and better yields, because of unnecessary overlap. You can operate the spreader in combination with the Kubota IsoMatch Tellus or IsoMatch Tellus GO.
The DSX is the high capacity model of the Kubota spreader range. The heavy duty construction of the DSX makes it possible to carry up a maximum of 3,450 or 3,900 litres of fertiliser with 3 extension rims. Easy setting and adjustment can be done with the FlowPilot on each spreading disc. An innovative drive line to each disc ensures gentle agitation due to the “slow rotating” agitator system, which runs at 15% of the spreading disc speed. Both discs can be shut off independently to spread half the working width, essential for preventing lodging in tapering headlands.
The DSX-W is the top of the range model. This ISOBUS 11783 compatible weighing spreader is equipped with an unique reference sensor. The FlowPilot dashboard on each spreading disc ensures simple and quick setting or adjustment. Different hopper capacities are available: two different basic hoppers of 1,500 and 1,875 litres and they can be increased with maximal 3 hopper extensions up to 3,450 and 3,900 litre capacity! Working widths from 12 up to 54m are possible. The DSX-W can be operated with the Kubota IsoMatch Tellus or Tellus GO.
The DSX-W GEOSPREAD is equipped with two actuators on each dosing unit. One of these actuators controls the setting of the discharge point of the dosing cup onto the disc (letter setting), the other controls the application rate. The GEOSPREAD system makes it possible to adjust the letter setting individually for both discs electrically from the tractor cab. This means the working width can be easily adjusted quickly and accurately just by touching the ISOBUS terminal!